How to Install a Ghost Immobiliser
Ghost immobilisers are an effective deterrent to car thieves. By combining this device with other security systems and staying vigilant, you can create a robust defense against modern, technologically-savvy thieves.
Ghost immobilisers can safeguard your vehicle from key cloning, hotwiring and relay car theft by requiring a pin code to start the engine. It is activated by buttons on your steering wheel or the centre console, which makes it unnoticeable to thieves.
Identifying the Wires
With more and more vehicles being taken away without the owner's keys, it is essential to secure your vehicle. While thieves might be able to duplicate your key fob, or even steal the vehicle's system by hacking it Ghost immobilisers provide an additional layer of protection by blocking all signals coming from the key fob, making it impossible to start your car without entering a pin code.
You can install the ghost immobiliser on your own, however it is better to let a professional do the work. A skilled professional will know the best place to place the unit and also how to properly connect it to your vehicle's wiring. The process of installation can be complicated, and it is essential that the connections are done correctly to avoid any damage or malfunctions.
To get the best results, you should be in a well-lit space and wear appropriate safety gear. You should also read through the user manual and familiarise yourself with the wiring system. This will help you identify the wires required for installation and ensure that you have the proper tools and parts to do the job properly.
Once car ghost immobiliser has been connected, you can connect the battery and test the system to determine whether it's working properly. Also, ensure that the battery's terminals are secure to avoid electrical problems. Also, mark the CAN H and CAN L wires using labels or tape to keep the track of them throughout the installation process.
The Ghost Immobiliser allows you to put your vehicle in Transport Mode when you need someone other than you to drive it temporarily for instance, for valet parking, or if the vehicle requires to be serviced. It allows you to enter the code using a service button located on the steering wheel, center console or door panels, and it will then enter PIN code change mode.
Some thieves attempt to bypass ghost immobilisers using jamming and spoofing devices which block or send fake messages to the system. This can be avoided by investing in anti-jamming technology and monitoring your Ghost immobiliser to detect signs that it's been tampered with.
Disconnecting the Battery
The ghost immobiliser, which is a cutting edge security device, has been designed to stop car theft. It utilizes cutting-edge technology to monitor the engine and deactivate it when the correct PIN is entered. This prevents the vehicle from being taken by thieves. The system is highly effective and stealthy, as it does not have visible indicators to discourage criminals. However, there might come a time when you need to remove the device, whether for maintenance or upgrades, or to sell your car.
This process requires special tools and skills because you'll be working with wires, and bypassing factory parts. It is important to follow the step by guideline provided by the manufacturer. You should also consult an expert auto electrician or mechanic, especially if you do not have any experience working on vehicles.
It is crucial to examine the condition of your battery after disconnecting the wires. Check that the battery is clean, free of corrosion and that all connections are secure. Consider replacing the battery if necessary to ensure it is sufficient to meet the electrical demands of a security system aftermarket.
After you have disconnected the wiring you can then remove the ghost immobiliser. Use strippers or wire cutters to safely disconnect the wires, making sure not to damage the wires or their terminals. Make sure you label each wire to ensure that you are able to reconnect them properly in the future. If the wires have been soldered, use an instrument that can withstand heat to break the connection. To avoid short-circuiting, is essential to wrap the wires in insulation tape or heat shrink tubing.
Connect the wires back to the 12V constant power source. Use a fuse tap if necessary to protect the connections with a fuse. Connect the grounding wire using an adequate grounding on the chassis of your vehicle.
Once you've reconnected your wires, restart your vehicle and enter the PIN. Then, you can restart the engine. If it doesn't start, the ghost immobiliser has been successfully removed.
Making the Connections
A ghost immobiliser is an affordable solution to improve the safety and security of your vehicle. It is connected to your vehicle's CAN bus system, capturing signals and preventing the engine from running until the correct PIN code is entered. This device is virtually impossible to disable. It's a great option for those who need extra security and peace of mind. It can lower your insurance premiums when combined with a Thatcham Approved Tracking System.
The process of obtaining and reviewing the wiring diagram of the vehicle model you are considering is crucial in the process of installing. The diagram can serve as a reference guide for locating the wires required to make precise connections. Making use of the correct connections or soldering techniques will ensure that the connection is durable and secure.
The wires that connect the Ghost immobiliser with the CAN bus must be correctly identified and connected. Use small labels or tape to identify the CAN L and H wires. This will avoid confusion during installation. The locations of these wires will differ in every vehicle, so it is important to consult the wiring diagram for your vehicle as well as online resources when identifying them.
After the correct cables are connected After connecting the correct cables, power will be restored to the Ghost immobiliser. It is a good idea to test the immobiliser's operation by starting the engine but not entering the PIN code. This will verify that the immobiliser is installed correctly and functioning as intended. It is recommended to check your immobiliser on a regular basis, as this will help to identify any issues or issues early.
Another benefit of the ghost immobiliser is that it can be installed in a matter of minutes and doesn't require any cutting or modification to the internal wiring of your vehicle. It is also an excellent choice for those who wish to enhance the security of their vehicles as it can be used in conjunction with a certified tracker or alarm, which will send a notification to your tablet or phone when the vehicle is altered.
Mounting the Unit
The Ghost immobiliser can be used as an deterrent to thieves of cars especially when paired with the use of a GPS tracking device. It uses buttons on the centre console, door panels and the steering wheel to create an exclusive sequence that only you can recognize to stop your vehicle from getting started. It is also tamper proof and weatherproof. It comes with a 3-year warranty and is endorsed by a variety of insurance companies.
It is crucial to follow the instructions during the installation process. While some people are comfortable handling the job on their own, it's best to consult a professional if you have any doubts. A multimeter and wire stripper are crucial tools for identifying the wires and making precise connections. It is also recommended to purchase insulation and electrical tape to shield the connections from damage. It's a great idea test your device after installation is complete to make sure that it functions as intended.
A Ghost immobiliser is an excellent option to safeguard your vehicle against theft, particularly in areas of high crime. It stops key cloning, ECU swapping, and other security risks, and can be used in conjunction with an iPhone application for simple management and monitoring. It's popular among car owners who want to secure their investment.
The Ghost II immobiliser is designed in a sleek, low-profile design that makes it virtually invisible to thieves. It is connected to the CAN (Controller Area Network) system in your vehicle and blocks the engine from being started without a PIN code being entered. The PIN code is generated by pressing a series of buttons on your steering wheel or console, or on your door. It can also be changed at any point. The device is also tamper proof and has a GPS tracker that will help police find your car in the event of a car theft. It's an excellent option for protecting your vehicle from thiefs and it's fully Thatcham-approved.